Mannequin Display

Dress from the Bottom

Dressing from the bottom on the major, the following product need to be the ‘bottoms’ – skirt, dress or trousers. Be aware for trousers these will need to be slotted over equally feet just just before putting in the footwear – the turned upright again and torso secured. To get a skirt or dress the torso would have to be secured back again on best on the legs/hip section initially before draping the skirt or dress around the head from the mannequin.

 

To enable smooth dressing of the top section (most visible section) it is necessary to first insert and secure one of the mannequins arms into the shoulder socket on the torso (make sure its the correct arm! right on the right side left on the left side). After securing one of the arms, open the blouse,shirt etc and slip it onto the secured arm - letting the excess fabric drape from the shoulder whilst you secure the other arm in place.

The other arm should be slipped down the sleeve (insert from the neck line down the length of the sleeve hand facing downwards. Then once fully inside the sleeve the arm can be secured.

             
Once the top garments are on and all components in place, the main 'dressing can begin. But first check to ensure that the full mannequin is firm & secure to the base. Once full dressed and styled the mannequin should be handled very little to avoid creasing so positioning accurately beforehand is advantageous.